SCB10-630/6
SHENGTE
Availability: | |
---|---|
Quantity: | |
Dry type transformers feature cutting-edge insulation materials that protect against current leakage and arcs. These transformers keep their iron cores and windings dry, not requiring the traditional bath in insulating oil. With options for natural or forced air cooling, these transformers are built for safety and reliability without the need for regular upkeep.
Features:
1. Exceptional Performance Efficiency: Exhibits low operational losses, reduced noise, and minimal partial discharge. With superior cooling, it supports 120% load capacity under forced air conditions.
2. High Resistance to Moisture: Operates flawlessly in up to 100% humidity and can restart without drying after being shut down.
3. Compliant with Safety and Environmental Protocols: This fire-resistant and non-polluting unit integrates well within load centers, enhancing safety.
4. Temperature Protection: Features a high-tech temperature control system that ensures reliability and safe operations.
5. Maintenance Simplicity and Easy Setup: Designed for quick installation and maintenance-free use, lowering overall operational expenses.
6. Proven Field Reliability: Studies indicate that this transformer adheres to the most rigorous international standards for reliability.s anything else you'd like to adjust or add!
Our advantages
1. The high-voltage winding is vacuum cast with epoxy resin filled with fillers, with low partial discharge and high electrical strength of the coil. The inner and outer walls of the winding are reinforced with glass fiber mesh plates, which increases the mechanical strength of the coil and improves the ability of the transformer to withstand sudden short circuits.
2. The low-voltage winding adopts a foil structure, which solves the problem of axial spiral angle when using wire winding, making the ampere turn more balanced. At the same time, the coil adopts axial cooling air duct, enhancing the heat dissipation capacity. The DMD epoxy resin pre impregnated cloth is used between the winding layers, and the overall solidification is formed.
3. The iron core is made of high-quality cold rolled silicon steel sheets, with a three-stage fully inclined joint structure. The core column is bound with F-class weft free straps, and the surface is wrapped with epoxy resin to reduce no-load loss, no-load current, and core noise. The clamps and fasteners are with special surface treatment, further improving the appearance quality of the transformer.
4. The transformer is equipped with a cross flow top blowing cooling fan, it is with low noise, high wind pressure, and beautiful appearance, enhancing the overload capacity of the transformer.
5. The transformer is equipped with an intelligent temperature controller, which improves the operational safety and reliability.
6. The casing can provide the further safety protection for the transformer, with the protection levels of IP20, IP23, IP30, IP33, etc. And the casing materials include aluminum alloy, cold rolled steel plate, stainless steel, etc.
Model | Rated Capacity (KVA) | Rated Voltage (KV) | Connection Method | No-load Loss (W) | Load Loss (W) | No-load Current (%) | Short Circuit Impedance (%) | ||
High Voltage | Voltage Regulation Range | Low Voltage | |||||||
SCB10-30 | 30 | 6 6.3 6.6 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 190 | 710 | 2 | 4 |
SCB10-50 | 50 | 270 | 1000 | 2 | 4 | ||||
SCB10-80 | 80 | 370 | 1380 | 1.5 | 4 | ||||
SCB10-100 | 100 | 400 | 1570 | 1.5 | 4 | ||||
SCB10-125 | 125 | 470 | 1850 | 1.3 | 4 | ||||
SCB10-160 | 160 | 540 | 2130 | 1.3 | 4 | ||||
SCB10-200 | 200 | 620 | 2530 | 1.1 | 4 | ||||
SCB10-250 | 250 | 720 | 2760 | 1.1 | 4 | ||||
SCB10-315 | 315 | 880 | 3470 | 1 | 4 | ||||
SCB10-400 | 400 | 980 | 3990 | 1 | 4 | ||||
SCB10-500 | 500 | 1160 | 4880 | 1 | 4 | ||||
SCB10-630 | 630 | 1300 | 5960 | 0.85 | 6 | ||||
SCB10-800 | 800 | 1520 | 6960 | 0.85 | 6 | ||||
SCB10-1000 | 1000 | 1770 | 8130 | 0.85 | 6 | ||||
SCB10-1250 | 1250 | 2090 | 9690 | 0.85 | 6 | ||||
SCB10-1600 | 1600 | 2450 | 11700 | 0.85 | 6 | ||||
SCB10-2000 | 2000 | 3050 | 14400 | 0.7 | 6 | ||||
SCB10-2500 | 2500 | 3600 | 17100 | 0.7 | 6 |
Guangdong Shengte Electric Co., Ltd. is located in Danzao Town, Nanhai District, Foshan City. It is an innovative enterprise focusing on green power distribution, energy saving and environmental protection. The power distribution products mainly include: S11 / S13 oil immersed transformer; SH15 amorphous alloy oil immersed transformer; SCB10 / SCB11 epoxy resin cast dry transformer; SGB11 open transformer; Combined (American) transformer; Pre-installed (European) substation; High and low voltage electrical equipment. It has become a qualified supplier of well-known enterprises such as China Southern Power Grid, State Grid, Evergrande Real Estate, China Railway, etc. The sales network covers most provinces and cities in the country and has been continuously expanded to overseas markets, such as Germany, Austria, Russia, etc.
Our advantages:
1. We have more than 15 years of manufacturing experience in the electric industry.
2. We have passed the ISO9001 and CE certification, the product quality accords with IEC standard.
3. Our factory covers an area of over 10000m2, we can produce 2000 more transformers each year.
4. We have advanced transformer production and testing equipments, and innovative technology.
5. We have a group of professional R & D and design personnel, installation and after-sales team.
6. We can provide professional OEM & ODM service.
Q1: Are you a manufacturer or trading company?
A1: Our factory covers an area of over 10000m2, we can produce 2000 more transformers each year.
Q2: Do you have the relevant certifications and test reports?
A2: Yes, we have ISO9001 and CE certification, and can provide the test reports according to IEC standard.
Q3: How long is the warranty period?
A3: It is 12 months.
Q4: Would you accept using customer's logo?
A4: Yes, we can provide OEM and ODM service.
Q5: What's the MOQ?
A5: It is 1 set.
Q6: What are the payment methods and terms?
A6: We accept T/T, Western Union, PayPal, etc. 30% advance payment before production, 70% balance payment before delivery.
Q7: How long is the delivery time?
A7: Generally it is 20-30 days, it depends on the order quantity.
Q8: What is the standard of package?
A8: Wooden case or special package according to customer's requirement.
Dry type transformers feature cutting-edge insulation materials that protect against current leakage and arcs. These transformers keep their iron cores and windings dry, not requiring the traditional bath in insulating oil. With options for natural or forced air cooling, these transformers are built for safety and reliability without the need for regular upkeep.
Features:
1. Exceptional Performance Efficiency: Exhibits low operational losses, reduced noise, and minimal partial discharge. With superior cooling, it supports 120% load capacity under forced air conditions.
2. High Resistance to Moisture: Operates flawlessly in up to 100% humidity and can restart without drying after being shut down.
3. Compliant with Safety and Environmental Protocols: This fire-resistant and non-polluting unit integrates well within load centers, enhancing safety.
4. Temperature Protection: Features a high-tech temperature control system that ensures reliability and safe operations.
5. Maintenance Simplicity and Easy Setup: Designed for quick installation and maintenance-free use, lowering overall operational expenses.
6. Proven Field Reliability: Studies indicate that this transformer adheres to the most rigorous international standards for reliability.s anything else you'd like to adjust or add!
Our advantages
1. The high-voltage winding is vacuum cast with epoxy resin filled with fillers, with low partial discharge and high electrical strength of the coil. The inner and outer walls of the winding are reinforced with glass fiber mesh plates, which increases the mechanical strength of the coil and improves the ability of the transformer to withstand sudden short circuits.
2. The low-voltage winding adopts a foil structure, which solves the problem of axial spiral angle when using wire winding, making the ampere turn more balanced. At the same time, the coil adopts axial cooling air duct, enhancing the heat dissipation capacity. The DMD epoxy resin pre impregnated cloth is used between the winding layers, and the overall solidification is formed.
3. The iron core is made of high-quality cold rolled silicon steel sheets, with a three-stage fully inclined joint structure. The core column is bound with F-class weft free straps, and the surface is wrapped with epoxy resin to reduce no-load loss, no-load current, and core noise. The clamps and fasteners are with special surface treatment, further improving the appearance quality of the transformer.
4. The transformer is equipped with a cross flow top blowing cooling fan, it is with low noise, high wind pressure, and beautiful appearance, enhancing the overload capacity of the transformer.
5. The transformer is equipped with an intelligent temperature controller, which improves the operational safety and reliability.
6. The casing can provide the further safety protection for the transformer, with the protection levels of IP20, IP23, IP30, IP33, etc. And the casing materials include aluminum alloy, cold rolled steel plate, stainless steel, etc.
Model | Rated Capacity (KVA) | Rated Voltage (KV) | Connection Method | No-load Loss (W) | Load Loss (W) | No-load Current (%) | Short Circuit Impedance (%) | ||
High Voltage | Voltage Regulation Range | Low Voltage | |||||||
SCB10-30 | 30 | 6 6.3 6.6 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 190 | 710 | 2 | 4 |
SCB10-50 | 50 | 270 | 1000 | 2 | 4 | ||||
SCB10-80 | 80 | 370 | 1380 | 1.5 | 4 | ||||
SCB10-100 | 100 | 400 | 1570 | 1.5 | 4 | ||||
SCB10-125 | 125 | 470 | 1850 | 1.3 | 4 | ||||
SCB10-160 | 160 | 540 | 2130 | 1.3 | 4 | ||||
SCB10-200 | 200 | 620 | 2530 | 1.1 | 4 | ||||
SCB10-250 | 250 | 720 | 2760 | 1.1 | 4 | ||||
SCB10-315 | 315 | 880 | 3470 | 1 | 4 | ||||
SCB10-400 | 400 | 980 | 3990 | 1 | 4 | ||||
SCB10-500 | 500 | 1160 | 4880 | 1 | 4 | ||||
SCB10-630 | 630 | 1300 | 5960 | 0.85 | 6 | ||||
SCB10-800 | 800 | 1520 | 6960 | 0.85 | 6 | ||||
SCB10-1000 | 1000 | 1770 | 8130 | 0.85 | 6 | ||||
SCB10-1250 | 1250 | 2090 | 9690 | 0.85 | 6 | ||||
SCB10-1600 | 1600 | 2450 | 11700 | 0.85 | 6 | ||||
SCB10-2000 | 2000 | 3050 | 14400 | 0.7 | 6 | ||||
SCB10-2500 | 2500 | 3600 | 17100 | 0.7 | 6 |
Guangdong Shengte Electric Co., Ltd. is located in Danzao Town, Nanhai District, Foshan City. It is an innovative enterprise focusing on green power distribution, energy saving and environmental protection. The power distribution products mainly include: S11 / S13 oil immersed transformer; SH15 amorphous alloy oil immersed transformer; SCB10 / SCB11 epoxy resin cast dry transformer; SGB11 open transformer; Combined (American) transformer; Pre-installed (European) substation; High and low voltage electrical equipment. It has become a qualified supplier of well-known enterprises such as China Southern Power Grid, State Grid, Evergrande Real Estate, China Railway, etc. The sales network covers most provinces and cities in the country and has been continuously expanded to overseas markets, such as Germany, Austria, Russia, etc.
Our advantages:
1. We have more than 15 years of manufacturing experience in the electric industry.
2. We have passed the ISO9001 and CE certification, the product quality accords with IEC standard.
3. Our factory covers an area of over 10000m2, we can produce 2000 more transformers each year.
4. We have advanced transformer production and testing equipments, and innovative technology.
5. We have a group of professional R & D and design personnel, installation and after-sales team.
6. We can provide professional OEM & ODM service.
Q1: Are you a manufacturer or trading company?
A1: Our factory covers an area of over 10000m2, we can produce 2000 more transformers each year.
Q2: Do you have the relevant certifications and test reports?
A2: Yes, we have ISO9001 and CE certification, and can provide the test reports according to IEC standard.
Q3: How long is the warranty period?
A3: It is 12 months.
Q4: Would you accept using customer's logo?
A4: Yes, we can provide OEM and ODM service.
Q5: What's the MOQ?
A5: It is 1 set.
Q6: What are the payment methods and terms?
A6: We accept T/T, Western Union, PayPal, etc. 30% advance payment before production, 70% balance payment before delivery.
Q7: How long is the delivery time?
A7: Generally it is 20-30 days, it depends on the order quantity.
Q8: What is the standard of package?
A8: Wooden case or special package according to customer's requirement.