Underground Combined Substation

short description:

The buried substation is to completely bury the traditional box transformer and semi-buried box transformer below the ground, and the ground does not affect the use.

Product Detail

Product Tags

What is Underground combined substation?

The ZBW-D series underground combined substation type is a complete set of substations integrating high-voltage switch cabinets, buried transformers, and low-voltage power distribution cabinets. It is the foundation of our company in order to meet the requirements of urban construction and environmental protection in the combined substation. A series of products developed and designed in China. The underground combined substation has the advantages of advanced technology, beautiful appearance, low noise, safe and reliable operation, convenient maintenance, compact structure, and small footprint. It is suitable for urban public places, streets, parks, residential quarters, scenic quarters, etc. The site is used for receiving and distributing electric energy in the power distribution system. In the power distribution system, it can be used in the ring network power distribution system, and can also be used in the dual power supply or radiation terminal power distribution system.

trhyrt (1)
trhyrt (2)
trhyrt (3)

Product description

1. The altitude does not exceed 1000m.

2. Ambient temperature: the highest temperature is 40℃, the lowest temperature is -25℃, the highest daily average temperature does not exceed 30℃, and the daily temperature difference is ≤20℃.

3. The relative humidity of the air does not exceed 90% (+25℃).

4. The outdoor wind speed does not exceed 35m/s.

5.The inclination of the ground does not exceed 3°.

6. There is no danger of explosion, fire, serious pollution, chemical corrosion and severe vibration at the installation site

7. When the above conditions of use cannot meet the requirements, the user can negotiate with our company to resolve.

trhyrt (4)
trhyrt (6)
trhyrt (5)


The underground combined substation is divided into two parts: the ground and the underground. The ground part is divided into high-voltage switch cabinets, low-voltage power distribution cabinets and shells, and the underground is a buried transformer and a buried box.

Shell structure: The shell is made of aluminum-zinc-clad board, the surface is covered with wood, and the top is a metal glazed tile roof. The rooms of the substation are separated into independent small rooms with steel plates, and are equipped with lighting devices. The top cover is a double-layer structure, which can prevent heat radiation from increasing the indoor temperature and at the same time has good ventilation.

High-voltage unit: The high-voltage cabinet adopts SF6 insulated ring network cabinet or SF6 load switch cabinet, which has compact structure, small size, high reliability, long service life and maintenance-free.

Low-voltage unit: The low-voltage cabinet adopts GGD cabinet, which can be equipped with metering, outlet, measurement, and capacitance automatic compensation devices according to user requirements.

Transformer unit: The transformer adopts a low-temperature rise, low-loss underground transformer, the high-voltage side of the transformer adopts a fully sealed, fully insulated cable plug connection, and the low-voltage side adopts a low-voltage sealed lead device for outlet, even if the transformer is completely immersed in water Reliable operation, and the transformer is installed in the buried box first, and then buried in the ground. The noise of the transformer will not spread to the ground, preventing noise pollution. If the transformer leaks oil, the oil will only leak in the buried tank and will not pollute the environment. 

trhyrt (8)
trhyrt (9)
trhyrt (10)
trhyrt (7)

  • Previous:
  • Next:

  • Write your message here and send it to us

    Product categories