Dry type transformer adopts the special insulation materials to isolate current and prevent arcing, its iron core and winding are not immersed in the insulating oil, the cooling methods are divided into natural air cooling and forced air cooling. It is safer in operation, higher reliability and maintenance free.Dry type transformer adopts the special insulation materials to isolate current and prevent arcing, its iron core and winding are not immersed in the insulating oil, the cooling methods are divided into natural air cooling and forced air cooling. It is safer in operation, higher reliability and maintenance free.

Features:

1. It is with low loss, low partial discharge, low noise, strong heat dissipation, and can operate at 120% rated load if under the condition of forced air cooling.

2. It is fire-resistant and non-pollution, can operate more safely and can be installed directly in the load center.

3. It is easy to be installed, maintenance free, with longer service life and lower comprehensive operating costs.

Our advantages

1. The high-voltage winding is vacuum cast with epoxy resin filled with fillers, with low partial discharge and high electrical strength of the coil. The inner and outer walls of the winding are reinforced with glass fiber mesh plates, which increases the mechanical strength of the coil and improves the ability of the transformer to withstand sudden short circuits.

2. The low-voltage winding adopts a foil structure, which solves the problem of axial spiral angle when using wire winding, making the ampere turn more balanced. At the same time, the coil adopts axial cooling air duct, enhancing the heat dissipation capacity. The DMD epoxy resin pre impregnated cloth is used between the winding layers, and the overall solidification is formed.

3. The iron core is made of high-quality cold rolled silicon steel sheets, with a three-stage fully inclined joint structure. The core column is bound with F-class weft free straps, and the surface is wrapped with epoxy resin to reduce no-load loss, no-load current, and core noise. The clamps and fasteners are with special surface treatment, further improving the appearance quality of the transformer.

4. The transformer is equipped with a cross flow top blowing cooling fan, it is with low noise, high wind pressure, and beautiful appearance, enhancing the overload capacity of the transformer.

5. The transformer is equipped with an intelligent temperature controller, which improves the operational safety and reliability.

6. The casing can provide the further safety protection for the transformer, with the protection levels of IP20, IP23, IP30, IP33, etc. And the casing materials include aluminum alloy, cold rolled steel plate, stainless steel, etc.

Product Parameters

Production Process

Company Profile

Guangdong Shengte Electric Co., Ltd. is located in Danzao Town, Nanhai District, Foshan City. It is an innovative enterprise focusing on green power distribution, energy saving and environmental protection. The power distribution products mainly include: S11 / S13 oil immersed transformer; SH15 amorphous alloy oil immersed transformer; SCB10 / SCB11 epoxy resin cast dry transformer; SGB11 open transformer; Combined (American) transformer; Pre-installed (European) substation; High and low voltage electrical equipment. It has become a qualified supplier of well-known enterprises such as China Southern Power Grid, State Grid, Evergrande Real Estate, China Railway, etc. The sales network covers most provinces and cities in the country and has been continuously expanded to overseas markets, such as Germany, Austria, Russia, etc.

Our advantages:

1. We have more than 15 years of manufacturing experience in the electric industry.

2. We have passed the ISO9001 and CE certification, the product quality accords with IEC standard.

3. Our factory covers an area of over 10000m², we can produce 2000 more transformers each year.

4. We have advanced transformer production and testing equipments, and innovative technology.

5. We have a group of professional R & D and design personnel, installation and after-sales team.

6. We can provide professional OEM & ODM service.

Project Cases

Certifications

Exhibition

Packaging & Shipping

FAQ

Q1: Are you a manufacturer or trading company?

A1: Our factory covers an area of over 10000m², we can produce 2000 more transformers each year.

Q2: Do you have the relevant certifications and test reports?

A2: Yes, we have ISO9001 and CE certification, and can provide the test reports according to IEC standard.

Q3: How long is the warranty period?

A3: It is 12 months.

Q4: Would you accept using customer's logo?

A4: Yes, we can provide OEM and ODM service.

Q5: What's the MOQ?

A5: It is 1 set.

Q6: What are the payment methods and terms?

A6: We accept T/T, Western Union, PayPal, etc. 30% advance payment before production, 70% balance payment before delivery.

Q7: How long is the delivery time?

A7: Generally it is 20-30 days, it depends on the order quantity.

Q8: What is the standard of package?

A8: Wooden case or special package according to customer's requirement.