High Quality Electrical Prefabricated Substation Container Substation Wholesale-shengte
Pre-installed substation (also known as European box transformer), in line with GB/T17467-1998 and IEC1330 standards, flexible and convenient installation, low loss, low noise, short circuit and overload resistance.
It is suitable for commercial centers, residential districts, industrial and mining enterprises, hospitals, schools, airports, stations, ports, subway and other places. YBM and YBP are two kinds of layout.
Substation structure is "eye" or "product" layout
The shell material of the product is aluminium alloy plate, stainless steel plate, composite plate, glass fiber reinforced cement plate, etc.
The substation base is made of galvanized channel steel or cement with strong corrosion resistance and sufficient mechanical strength.
The top cover of the box body adopts a double-layer structure, which has good heat insulation, radiation protection and ventilation effect.
Each room of substation is separated by iron plate, and each room is equipped with lighting facilities. The top G of transformer is equipped with automatic exhaust device to adjust
The color of the box is flexible and can be coordinated with the surrounding environment.
Prefabricated substation (also known as European box change), in line with GB/T17467-1998 standard and IEC1330 standard, flexible installation, low loss, low noise, strong resistance to short circuit and overload. Applicable to commercial centers, residential quarters, industrial and mining enterprises, hospitals, schools, airports, stations, ports, subways and other places. There are two layouts: the word font (YBM) and the font type (YBP).
CONDITIONS OF USE:
· Altitude: ≤ 1000m;
· Wind speed: ≤ 34m/S (not more than 700pa);
· Ambient temperature: maximum temperature +40℃ , minimum temperature -35℃;
· Relative humidity: the daily average is not more than 95%, and the monthly average is not more than 95%;
· Shockproof: The horizontal acceleration is not more than 0.4m/s2, The vertical acceleration is not more than 0.15mm/s2;
· Installation site inclination: no more than 3°;
· Installation environment: Installed in a place where there is no fire, explosion hazard, serious pollution, chemical corrosion and severe vibration.
· If you exceed the above conditions, you can negotiate with the company.
· Small size, compact structure and easy to install.
A. The substation structure is arranged in the shape of "mesh" or "product".
B. The product shell material is made of aluminum alloy plate, stainless steel plate, composite plate, glass fiber reinforced cement board, and the like.
C. The base of the substation is made of galvanized channel steel or cement, which has strong corrosion resistance and sufficient mechanical strength.
D. The top cover of the cabinet adopts double-layer structure, which has good heat insulation, radiation and ventilation effects.
E. Each room of the substation is separated from the independent chamber by the stroke. Each room is equipped with lighting facilities. The top of the transformer is equipped with an automatic air exhaust device to adjust the temperature of the transformer room.
F. The box is flexible in color and can be coordinated with the surrounding environment.
|Name||Company||High pressure side||Transformer||Low pressure side LV|
|Rated current||KA||12.2(2s or 4s）16（2s or 4s）20（2s or 4s）||15(1s), 30(1s), 50(1s), 65(1s)|
|Power Frequency Tolerance Current||KV||75/85|
|Lightning Impulse Voltage Resistance||KV||75|
|noise level||dB||< 50|
Note: prodcut dimensions and weight are data for a certain period of time and may change due to design improvements.